The extreme demands placed on equipment within the Oil and Gas industry require high standards of reliability, operational best practice and leading-edge technical expertise. These strict requirements make AESSEAL® the natural fit for the industry.
Click any of the links to the left for more specific industry information or read below for three common scenarios where AESSEAL® is adding value in the Oil and Gas industry. Our competitive – and continuing – advantage in this sector comes from offering innovative solutions with measurable value.
Meet emission targets with low capital expenditure
Many plants face increasing pressure to upgrade old equipment, typically API610 Ed.5 to Ed.7 to conform to increasingly tighter emission legislation. This creates a considerable plant CapEx burden.
AESSEAL® can retrofit API682 qualification tested seal face technology to mature assets. This allows you to get world-class seal emission levels without replacing or modifying the old equipment.
Fix known fire and safety risks
The radial clearances between the counter-rotational parts in a Plan 23/52/53 seal are often reduced by seal suppliers so that conventional seal pumping rings can function. This carries well-documented safety risks, including danger to operators and the possibility of fire.
AESSEAL® has world-leading bi-directional pumping ring technology which delivers exceptional flow while fully conforming to the best-practice radial clearances stated in API682 Ed.3 Section 184.108.40.206.
Drastically reduce equipment failures from sand and waxy crude
Sand and waxy crude are major causes of mechanical seal failure during extraction and oil processing. The cause of failure is typically clogged seal springs positioned in the process media. Unfortunately nearly all API682 mechanical seals found on the market today share this design flaw.
AESSEAL® API seal designs have multiple springs that do not contact the process fluid. This eliminates all possibility of seal face hang-up or seal failure from spring clogging, significantly increasing mean-time between failure, even with high crude consistencies or solids content.
In addition to common-sense mechanical seal solutions, AESSEAL® offers a range of innovative Oil & Gas Seal Support Systems, from Plan 75: gas containment systems to Plan 53C: pressure tracking systems. We also manufacture bearing protection certified to IP66 and API610 Section 5.1.25 and refurbish any make of Dry Gas Seal to API617.
Recommended Products in this Industry
Solutions for your industryIf you would like to find out more, or to speak to a customer service representative
Click here to contact us